Product Name | Summary | Category | Tech Data Sheet | Safety Data Sheet |
---|---|---|---|---|
ALUMINUM DYE CHART | ||||
DYNAL DYE BUFFER SOLUTION | Used to help stabilize and buffer seal baths against hard to control pH fluctuations. | TDS | ||
DYNAL EC 60 | Electrolytic colouring process that can produce a wide range of light fast colours on anodized aluminum. | SDS | ||
DYNAL EE | Liquid additive for use in sulphuric anodizing baths, which allows for higher current densities without burning in both conventional and hard anodizing. Contains an algaecide. | TDS | SDS | |
DYNAL FS | Concentrated liquid additive used to create a controlled foam blanket to minimize the release of sulphuric acid fumes into the air while anodizing. | TDS | SDS | |
DYNAL GOLD 4N | Inorganic colorant used to achieve various shades of gold and brass for coloring anodic coatings on aluminum | TDS | SDS | |
DYNAL LFA | Liquid fluoride concentrate designed to adjust the pH of low temperature seal products. | TDS | ||
DYNAL PCA | Liquid additive used to raise and help buffer the pH of the seal. Can be used in all seal baths to help promote seal, minimize smut and extend bath life. | TDS | ||
DYNAL PCA-2 | Liquid additive used to raise and help buffer the pH of the seal. Can be used in all room temperature seal baths to help promote seal, minimize smut and extend bath life. | TDS | ||
DYNAL SCA | Liquid seal additive designed to eliminate smut seal and water spots. | |||
DYNAL SEALANT LT | Low temperature sealant (120-160F). Concentrated Liquid product designed to give a high quality seal and does not affect dyes. Non-yellowing, smut free sealing. Meets all current seal tests. | TDS | ||
DYNAL SEALANT MT | Mid temperature sealant (160-190F). Concentrated Liquid product designed to give a high quality seal and does not affect dyes. Low-foaming, non-yellowing, smut free sealing. Meets all current seal tests. | TDS | SDS | |
DYNAL SEALANT MT #2 | Mid-temperature sealing system for anodized aluminum. | TDS | ||
DYNAL SEALANT NF | Non-nickel sealant (180-210F). Concentrated liquid product designed to give a high quality seal and does minimal leaching of dyes. Non-yellowing, smut free sealing. Meets all current seal tests. | TDS | ||
DYNAL SEALANT RT | Room temperature sealant (70-90F). Concentrated Liquid product designed for good paint and weather stripping adhesion. pH regulated, non-yellowing, smut free sealing. Meets all anodizing specifications. | TDS | SDS | |
DYNAL SEALANT RT #2 | Low temperature sealing system for anodized aluminum. | TDS |
Product Name | Summary | Category | Tech Data Sheet | Safety Data Sheet |
---|---|---|---|---|
DYNAFIN 4740 | Liquid concentrate that is diluted with water to produce decorative oxide finishes on a variety of base metals. Range of colour tones are from brown to purple to greyish black. | TDS | SDS | |
DYNAFIN 511 | Liquid concentrate that is diluted with water to produce decorative oxide finishes on copper, copper alloys and nickel. Produces a range of colours from jet black to light brown on copper and copper alloys and light grey to black on nickel. | TDS | SDS | |
DYNAFIN 512 | Liquid concentrate that is diluted with water to produce decorative oxide finishes on copper alloys. DYNAFIN 512 produces more pronounced brown to chocolate brown colors than DYNAFIN 511. | TDS | SDS | |
DYNAFIN 513 | Liquid concentrate that is diluted with water to produce decorative oxide finishes on copper alloys. DYNAFIN 513 is similar to DYNAFIN 512, but produces richer brown tones. | TDS | ||
DYNAFIN 514 | Liquid concentrate that is diluted with water to produce decorative oxide finishes on copper and copper alloys. DYNAFIN 514 produces a range of colours from medium-dark brown to black. | TDS | SDS | |
DYNAFIN 526 | Liquid concentrate that is diluted with water to produce decorative oxide finishes on pewter, tin alloys and lead alloys. The depth of black can be controlled by varying the concentration and immersion time | TDS | SDS | |
DYNAFIN 529 | Liquid concentrate that is diluted with water to produce decorative oxide finishes on copper and copper alloys. DYNAFIN 529 produces a range of colours from light brown, grey, purple and black/pewter on copper and copper alloys. | TDS | SDS | |
DYNAFIN 530 | Liquid concentrate that is used full strength or diluted with water to produce decorative oxide finishes on pewter and tin. | TDS | SDS | |
DYNAFIN 550 | Liquid concentrate that is diluted with water to produce decorative oxide finishes on copper and copper alloys. DYNAFIN 550 produces a range of colours from light brown to blackish brown on copper and copper alloys. | TDS | SDS | |
DYNAFIN AG | Liquid concentrate that is used to produce natural verdi or patina green colour on copper alloys. | TDS | ||
DYNAFIN RTC | Liquid product used at full strength or diluted with water to produce natural Verdi, patina green or bluish colours on copper alloys. | TDS | SDS |
Product Name | Summary | Category | Tech Data Sheet | Safety Data Sheet |
---|---|---|---|---|
DYNAFIN 507 | Blackening process that produces a black oxide finish on a variety of stainless steels, cast iron as well as mild steel and low carbon steels. The coatings produced complies to mil-DTL-13924D, Class 4. | TDS | SDS | |
DYNAFIN 520 | Produces a jet-black adherent black oxide finish on copper and copper alloys. The coatings produced are chemically and heat stable to a temperature of 400F. Applying oil, wax or a lacquer will help enhance the corrosion protection. | TDS | SDS | |
DYNAFIN 520 L | Liquid version of Dynafin 520. | TDS | SDS | |
DYNAFIN BZ | Produces a jet- black, adherent, chemically and heat stable black oxide finish on zinc and zinc alloys. The coatings should be protected with wax, oil, or lacquer. | TDS | SDS | |
DYNAFIN BZ-2 | Produces a jet- black, adherent, chemically and heat stable black oxide finish on zinc and zinc alloys. The coatings should be protected with wax, oil, or lacquer. | SDS | ||
DYNAFIN CS | Liquid, chromium containing zinc phosphate sealer to increase the corrosion resistance of subsequent oil or paint finishes. | TDS | SDS | |
DYNAFIN HBO | Hot black oxide solution for steel and cast iron. Meets MIL C - 13924B for class 1 coatings. | TDS | SDS | |
DYNAFIN HBO L | Liquid hot black oxide solution for steel and cast iron. Meets MIL C - 13924B for class 1 coatings. | TDS | SDS | |
DYNAFIN ICS | Chromium containing iron phosphate sealer to increase the corrosion resistance of subsequent oil or paint finishes. | TDS | ||
DYNAFIN NC | Liquid inhibitive rinse applied on most phosphate surfaces to promote paint adhesion and reduce drip and run-down staining while increasing corrosion protection. Suitable for use on iron, zinc, calcium and manganese modified phosphate surfaces. | TDS | SDS | |
DYNAFIN NCS | Liquid, non-chrome containing inhibitive rinse applied on iron phosphate surfaces and is designed to increase corrosion protection and promote paint adhesion. | TDS | ||
DYNAFIN RTB | Room temperature, immersion process designed to blacken carbon steel surfaces. | TDS | SDS | |
DYNAFIN RTBA | Room temperature, immersion process designed to blacken aluminum surfaces. | TDS | SDS | |
DYNAFIN RTBS | Room temperature, immersion process designed to blacken stainless steel surfaces. | TDS | SDS | |
DYNAPHOS CP | Liquid, immersion, calcium-modified zinc phosphate used to produce exceptionally fine-grained, smooth, conversion coatings on steel. The microcrystalline coating provides excellent corrosion resistance and paint adhesion. | TDS | ||
DYNAPHOS FeR | Neutral, liquid product used as an accelerator in zinc phosphate solutions. Dynaphos FeR may be used in spray and immersion applications. | TDS | ||
DYNAPHOS FG | Low temperature, nickel-free, zinc phosphate used to produce fine grain crystalline conversion coating on steel surfaces in spray and immersion applications. Meets the requirements of TT-C-490B Type I, QQ-Z-352C Type III and QQ-P-416C Type III. | TDS | ||
DYNAPHOS HZ | Liquid, immersion zinc phosphate used to produce fine grain crystalline heavyweight coatings on steel surfaces. Meets the requirements of ASTM F1137, MIL-DTL-16232G TYPE Z and A-A59267 when properly applied. | TDS | SDS | |
DYNAPHOS HZ-CS | Liquid, immersion zinc phosphate used to produce fine grain crystalline heavyweight coatings on steel surfaces while generating minimal sludge. Meets the requirements of ASTM F1137, MIL-DTL-16232G TYPE Z and A-A59267 when properly applied. | TDS | SDS | |
DYNAPHOS MP | Liquid, immersion manganese phosphate used to produce a fine grain crystalline heavyweight coatings on steel surfaces. Meets the requirements of MIL-DTL-16232G, TYPE M and MIL-P-50002 when properly applied. | TDS | SDS | |
DYNAPHOS OIL No. 1 | Water-soluble rust preventative for steel and zinc phosphated steel. Dry to touch formulation that will add good salt spray protection when applied to Dynaphos HZ. | TDS | SDS | |
DYNAPHOS OIL No. 2 | Water-soluble rust preventative for steel and zinc phosphated steel. Dry to touch formulation that will add 200 hours of salt spray protection when applied to Dynaphos HZ. | TDS | SDS | |
DYNAPHOS PB | Liquid concentrated additive used for producing black phosphate coatings. | TDS | SDS |
Product Name | Summary | Category | Tech Data Sheet | Safety Data Sheet |
---|---|---|---|---|
DYNAFIN CB | Alkaline, chrome-based passivating solution for copper and brass. DYNAFIN CB will help prevent spotting and bleed out, common with cyanide plating solutions, and will increase corrosion resistance while preserving the colour of the deposit. | TDS | SDS | |
DYNAFIN CBS | Alkaline, chrome-based, cathodic passivating solution for copper, brass, bronze and silver. Helps prevent spotting and bleed out, common with cyanide plating solutions. | TDS | SDS | |
DYNAFIN HCC | Additive used to reduce chromate leaching, rub off and staining. Will increase corrosion resistance on hexavalent chromates and can be used with yellow, olive drab and black chromates. | TDS | SDS | |
DYNAPASS CAD | Powdered, hexavalent, clear, bright, polished conversion coating for cadmium plated parts. It offers a wide operating window, ease of operation and excellent corrosion protection along with a crisp, bright and polished finish. | TDS | SDS | |
DYNAPASS CAD L | Liquid clear hexavalent conversion coating for cadmium plated parts. It offers a wide operating window, ease of operation, good corrosion protection along with a crisp, clear bright and polished finish. | TDS | SDS | |
DYNAPASS H AL LIQUID | Produces a protective conversion coating for aluminum and aluminum alloys. It offers a wide operating window, ease of operation and meets Specifications MIL-C-5541 method A and C to produce Class 3 coatings. | TDS | ||
DYNAPASS HAL | Powdered process which when diluted with water will produce a protective conversion coating for aluminum and aluminum alloys. It offers a wide operating window, ease of operation and meets or exceeds requirements of MIL C 5541. | TDS | SDS | |
DYNAPASS HB | Liquid hexavalent two part black conversion coating for zinc and zinc alloy plated parts. It offers a wide operating window, ease of operation and excellent corrosion protection along with a polished jet-black non-iridescent finish. | TDS | SDS | |
DYNAPASS HC | Liquid hexavalent clear conversion coating for zinc plated parts. It offers a wide operating window, ease of operation, good corrosion protection along with a crisp, bright blue polished finish. | TDS | SDS | |
DYNAPASS HCP | Powdered hexavalent clear conversion coating for zinc plated parts. It offers a wide operating window, ease of operation, good corrosion protection along with a crisp, bright blue polished finish. | TDS | SDS | |
DYNAPASS HG | Liquid which, when diluted with water will produce a pleasing forest green conversion coating on zinc and cadmium plated parts along with adequately prepared zinc-die cast parts. Single component. | TDS | SDS | |
DYNAPASS HO | 2 part concentrated liquid which, when diluted with water produce an olive drab conversion coating on zinc and cadmium plated parts along with adequately prepared zinc-die cast parts. | TDS | SDS | |
DYNAPASS HY | Liquid hexavalent yellow conversion coating for zinc and cadmium plated parts. It offers a wide operating window, ease of operation and excellent corrosion protection along with a crisp, bright and polished yellow iridescent finish. | TDS | SDS | |
DYNAPASS HYD | Liquid hexavalent yellow conversion coating specifically formulated for use with dyes. | TDS | SDS | |
DYNAPASS HYN | Liquid hexavalent yellow conversion coating for electroplated zinc parts It offers excellent polishing and corrosion protection, along with a bright yellow iridescent finish | TDS | SDS | |
DYNAPASS HYP | Dynapass HYP is a powdered hexavalent yellow conversion coating for zinc and cadmium plated parts. It offers a wide operating window, ease of operation and excellent corrosion protection along with a polished yellow iridescent finish. | TDS | SDS | |
DYNAPASS HYZnNi | Liquid hexavalent yellow conversion coating for zinc nickel containing 10 and 18 % Nickel. It offers a wide operating window, ease of operation and neutral salt spray protection exceeding 1500 hours to white corrosion. | TDS | SDS | |
DYNAPASS HZD | Powdered hexavalent conversion coating for zinc or cadmium plated parts and zinc diecastings. It provides a high degree of polishing for increased brilliance and the formation of a chromium like surface after leaching. | TDS | ||
DYNAPASS NP | Additive for use in Dynapass T120 solution utilizing nano-particle technology representing the latest development in trivalent chromium passivation. | TDS | SDS | |
DYNAPASS T10 | Liquid trivalent clear conversion coating for zinc-plated parts. It offers a wide operating window, ease of operation and good corrosion protection along with a polished, bright finish. | TDS | SDS | |
DYNAPASS T100 | Liquid trivalent clear conversion coating for zinc plated parts providing corrosion protection exceeding 72 hours of neutral salt spray testing to white corrosion along with a bright and pleasing blue colour. | TDS | SDS | |
DYNAPASS T103 | High Corrosion Resistant Trivalent Blue Conversion Coating for Zinc. Wide operating window, ease of operation and corrosion protection exceeding 96 hours of neutral salt spray testing to white corrosion products. | TDS | SDS | |
DYNAPASS T107 | High Corrosion Resistant Trivalent Blue Conversion Coating for Zinc. Wide operating window, ease of operation and corrosion protection exceeding 96 hours of neutral salt spray testing to white corrosion products. | TDS | SDS | |
DYNAPASS T110 | Liquid trivalent clear conversion coating for zinc plated parts providing a wide operating window, ease of operation and good corrosion protection in neutral salt spray testing to white corrosion products. | TDS | SDS | |
DYNAPASS T120 | Liquid trivalent clear high performance conversion coating for zinc plated parts. It offers a wide operating window, ease of operation and corrosion protection exceeding 175 hours of neutral salt spray testing to white corrosion products. | TDS | SDS | |
DYNAPASS T120-FT | Iron tolerant version of Dynapass T 120. | TDS | ||
DYNAPASS T130 | Liquid trivalent blue conversion coating for zinc plated parts. It offers a wide operating window, ease of operation and corrosion protection exceeding 170 hours of neutral salt spray testing to white corrosion products. | TDS | SDS | |
DYNAPASS T150 | Cobalt Free, Thick Film Trivalent Conversion Coating for Zinc. It offers a wide operating window, ease of operation and corrosion protection exceeding 120 hours of neutral salt spray testing to white corrosion products. | TDS | ||
DYNAPASS T200 | Liquid trivalent iridescent clear ultra high performance conversion coating for zinc plated parts. It offers corrosion protection exceeding 250 hours of neutral salt spray testing to white corrosion products. | TDS | SDS | |
DYNAPASS T200-FT | Dynapass T200-FT is a high performance thick-film liquid trivalent iridescent conversion coating for zinc plated parts providing corrosion protection exceeding 250 hours of neutral salt spray testing to white corrosion products. | TDS | ||
DYNAPASS T300 | High Corrosion Resistant Trivalent Yellow Conversion Coating for Zinc providing up to 120 hours of neutral salt spray testing to white corrosion products. | TDS | SDS | |
DYNAPASS TAL | Liquid trivalent clear conversion coating for aluminum and aluminum alloys. | TDS | SDS | |
DYNAPASS TAP | Powdered process which when diluted with water will produce a trivalent clear conversion coating for aluminum and aluminum alloys. | TDS | SDS | |
DYNAPASS TB | Liquid, trivalent black passivate for zinc and zinc alloys. It offers uniform black appearance, ease of operation and over 100 hours of neutral salt spray testing to white corrosion products. | TDS | SDS | |
DYNAPASS TRI-GREEN | DYNAPASS TRI-GREEN is an additive used with DYNAPASS trivalent chromates to produce a trivalent green conversion coating. | TDS | SDS | |
DYNAPASS TRI-RED | TDS | SDS | ||
DYNAPASS TRI-YELLOW ADDITIVE | Produces an attractive trivalent yellow conversion coating which rivals the appearance of a hexavalent yellow conversion coating. | TDS | SDS | |
DYNAPASS TRI-YELLOW ADDITIVE PLUS | Produces an attractive trivalent yellow conversion coating that rivals the appearance of the hexavalent yellow conversion coating. Can be added directly to most trivalent passivate solution. | TDS | SDS | |
SURTEC 650 | Hexavalent chromium free passivating solutions for aluminum. meets or exceeds MIL-DTL-81706B and MIL-DTL-5541F. | TDS |
Product Name | Summary | Category | Tech Data Sheet | Safety Data Sheet |
---|---|---|---|---|
DYNAPHOS IP | Liquid, dual-purpose concentrate used to simultaneously clean and deposit a corrosion inhibitive phosphate coating on steel, galvanized steel and aluminum surfaces. Provides an iridescent, blue coating and is an ideal surface for paint bonding. | TDS | SDS | |
DYNAPHOS IP-FF | Fluoride-free, liquid, concentrate used to simultaneously clean and deposit a corrosion inhibitive phosphate coating on steel, galvanized steel and aluminum surfaces. Provides an iridescent, blue coating and is an ideal surface for paint bonding. | TDS | SDS | |
DYNAPHOS IP-HP | Liquid, long life, molybdate-free, concentrate used to clean and deposit a corrosion inhibitive phosphate coating on steel, galvanized steel and aluminum surfaces. Formulated to provide a coating weight of 25 mg/ft2 with little or no sludging. | TDS | SDS | |
DYNAPHOS IP-LF | Liquid, low foaming concentrate used to clean and deposit a corrosion inhibitive phosphate coating on steel, galvanized steel and aluminum surfaces. Provides an iridescent, blue coating and is an ideal surface for paint bonding. | TDS | SDS | |
DYNAPHOS SP #1 | Liquid, iron phosphate specially formulated for steam phosphating of large steel substrates. In one application, this economical process will clean and coat the surface prior to painting at temperatures as low as 38°C (100°F). | TDS | SDS | |
DYNAPHOS SP #2 | Liquid, iron phosphate specially formulated for steam phosphating of large steel substrates. In one application, this economical process will clean and coat the surface prior to painting at temperatures as low as 38°C (100°F). | TDS | SDS | |
DYNAPHOS SP #3 | Liquid, iron phosphate specially formulated for steam phosphating of most metal parts including steel, aluminum and galvanized substrates. This process will clean and coat the surface prior to painting at temperatures as low as 38°C (100°F). | TDS | SDS | |
DYNAPREP PFH | Phosphate, nonylphenol and nonylphenol ethoxylate-free cleaner and coater for improved paint adhesion for multi-metal applications. Can be used in a single step operation as well as 2 or 3 stage washers. Available in a low-foam version: DYNAPREP PFL | TDS | SDS | |
DYNAPREP PFL | Low-foaming, phosphate, nonylphenol and nonylphenol ethoxylate-free cleaner and coater for improved paint adhesion for multi-metal applications. Can be used in a single step operation as well as 2 or 3 stage washers. | TDS | SDS |
Product Name | Summary | Category | Tech Data Sheet | Safety Data Sheet |
---|---|---|---|---|
ACTIVATOR Cr#1 | Electrolytic activator for electroplated bright nickel deposits prior to chromium plating. Prevents milky films and stains (white wash) after chrome plating that result from passive bright nickel deposits. | TDS | SDS | |
ACTIVATOR Cr#2 | Electrolytic activator for electroplated bright nickel deposits prior to chromium plating. Prevents milky films and stains (white wash) after chrome plating that result from passive bright nickel deposits. | TDS | SDS | |
ACTIVATOR E | Electrolytic deoxidizing and descaling of steel and an electrolytic activator for bright nickel electroplated deposits prior to chrome plating. This activator prevents milky films and stains that result from passive bright nickel deposits. | TDS | SDS | |
DYNAPREP AC #1 | Phosphoric acid based cleaner for aluminum and aluminum alloys formulated to effectively clean a wide range of soils and leave a mild fine etched surface. | TDS | ||
DYNAPREP AD | Chromium free deoxidizer and desmutter for aluminum and aluminum alloys. | TDS | SDS | |
DYNAPREP AD #2 | Fluoride and chromium free deoxidizer and desmutter for aluminum and aluminum alloys. | TDS | SDS | |
DYNAPREP AD #2D | Concentrated liquid, fluoride and chromium free deoxidizer and desmutter for aluminum and aluminum alloys. Includes a detergent. | TDS | ||
DYNAPREP AD #3 | Liquid, chromium free de-oxidizer and de-smutter for aluminum and aluminum alloys. | TDS | SDS | |
DYNAPREP AD #3G | Powdered, chromium free de-oxidizer and de-smutter for aluminum and aluminum alloys. | TDS | ||
DYNAPREP AD #6 | Non-chromated, easy to handle deoxidizer that quickly removes oxides, smut, mill scale and heat treating discoloration from aluminum and a wide variety of its alloys. Brightens stainless steel. | TDS | ||
DYNAPREP AD #7D | Phosphoric acid based cleaner, brightener and pre-paint conditioner for aluminum. Should not be used on high copper bearing aluminum alloys or aluminum castings. | TDS | ||
DYNAPREP AE | Low foaming, alkaline aluminum etch designed to reduce build up of scale and sludge, easy to rinse, resulting in low drag out losses. | TDS | SDS | |
DYNAPREP AE #4 | Liquid, acidic cleaner formulated for a wide range of aluminum alloys, steel, brass, copper and zinc. It provides a mild, uniform etch that can be controlled by adjusting the solution concentration and temperature. | TDS | ||
DYNAPREP AE 738 | Liquid, acidic etch formulated to provide a fine matte satin finish on aluminum and aluminum alloys prior to anodizing. | TDS | ||
DYNAPREP AE ADDITIVE #1 | Aluminum etch additive formulated to prevent sludge and scale while significantly extending the etch bath life. | TDS | SDS | |
DYNAPREP AE-G | Powdered, alkaline enchant for use on aluminum and aluminum alloys. Specially formulated to provide an etch with extra hiding power to help hid die lines and other marks. | TDS | SDS | |
DYNAPREP AE-G2 | Powdered, alkaline etch for aluminum and aluminum alloys. Formulated with an inhibitive grain-refining agent for controlled etching, and chelating agents to prevent the formation of aluminum oxide sludge. | TDS | ||
DYNAPREP ALBOND | Cyanide based liquid alloy zincate used for producing a zinc immersion coating on properly prepared aluminum and aluminum alloy surfaces. | TDS | SDS | |
DYNAPREP ALBOND CF | Cyanide free liquid zincate used for producing a zinc immersion coating on properly prepared aluminum and aluminum alloy surfaces. | TDS | SDS | |
DYNAPREP ALBOND CF3 | Cyanide-free, low concentration, liquid zincate process designed to apply a thin zinc film on adequately prepared aluminum alloys. | TDS | SDS | |
DYNAPREP AS #1 | Powdered acid salt. Produces a smut-free and active surface on steel, zinc, brass, copper, nickel, aluminum, pewter, Kovar and Invar. Can be used a cathodic electrolyte to effectively remove tenacious oxides, smut and scale. | TDS | SDS | |
DYNAPREP AS #10 | Economical, powdered acid salt used to replace most mineral acid pickling and activating solutions used in electroplating applications. | TDS | SDS | |
DYNAPREP AS #2 | Powdered product that is used for stripping zincate from aluminum, deoxidizing aluminum. Can also be used to make a non-chelated, mild etch solution for copper. . | TDS | SDS | |
DYNAPREP AS #3 | Powdered, alkaline activating salt used in the cycle with DYNAFIN 520for the blackening brass and other copper alloys containing less than 90% copper. | TDS | ||
DYNAPREP AS #4 | Non-fluoride acid salt used to produce a smut-free and active surface on steel, zinc, brass, copper and nickel. Can be used as a cathodic electrolyte to effectively remove tenacious oxides, smut and scale. | TDS | SDS | |
DYNAPREP AS #5 | Two part powdered product that are dissolved in water to produce a non fuming pickling solution for copper, copper alloys, aluminum and other non-ferrous alloys. | TDS | SDS | |
DYNAPREP AS #6 | Acid salt used to produce a smut-free and active surface on steel, zinc, brass, copper, nickel, aluminum, pewter, Kovar and Invar. | TDS | SDS | |
DYNAPREP AS #7 | Fluoride-containing acid salt used in acid treatment and etching of various metals. It can be used to replace hydrofluoric acid, and is much safer to use since it is granular. | TDS | SDS | |
DYNAPREP AS #8 | Acid salt used to produce an active surface on steel, zinc die castings, brass and copper. | TDS | ||
DYNAPREP AS #9 | Liquid conditioner / activator used prior to room temperature blackening processes on difficult to blacken surfaces steel, cast iron and leaded steel substrates. | TDS | SDS | |
DYNAPREP BC #5 | Economical, mildly alkaline burnishing compound for use in barrel and in vibratory machine finishing operations. High luster finish in minimal operating time on copper alloys and precious metals. | TDS | ||
DYNAPREP BUILDER | Alkaline builder package for use with DYNAPREP cleaner surfactant packages to replace the liquid caustic soda for more effective cleaning. | TDS | SDS | |
DYNAPREP BUILDER P | Highly alkaline powdered product that is mixed with water to remove rust and oxidation from ferrous metals by immersion. Can be added to a Dynaprep alkaline soak cleaner to clean and de-rust in one step. | TDS | SDS | |
DYNAPREP FCA | Concentrated liquid mixture, which is added to hydrochloric or sulphuric acid pickling solutions to reduce the acid fumes without the aid of a foam blanket. | TDS | ||
DYNAPREP HDC | Concentrated surfactant package blended with alkaline builders to provide a soak cleaner with excellent detergency and an electro cleaner with superior conductivity. | TDS | ||
DYNAPREP IH | Effective inhibited acid material mixture, formulated to quickly remove rust, scale and oxides from ferrous metal surfaces without excessive attack of the base metal. | TDS | SDS | |
DYNAPREP INH | Liquid mixture, which is added to hydrochloric acid pickling solutions to protect the steel surface, reduce acid wastage, reduce metal loss, prevent pitting and discoloration of the metal surface. | TDS | SDS | |
DYNAPREP INH-2 | Liquid mixture, which is added to sulphuric acid or hydrochloric acid pickling solutions to protect the steel surface, reduce acid wastage, reduce metal loss, prevent pitting and discolouration of the metal surface. | TDS | ||
DYNAPREP INH-2P | Liquid mixture, which is added to sulphuric acid or hydrochloric acid pickling solutions to solubilize oils, protect the steel surface, reduce acid wastage, reduce metal loss, prevent pitting and discoloration of the metal surface. | TDS | ||
DYNAPREP PD | Concentrated powdered detergent, which is added to an existing cleaner tank to restore or improve cleaning properties. | TDS | ||
DYNAPREP SE300 | Concentrated liquid surfactant package suitable for both soak and electro cleaning of steel, cast iron and stainless steel. Can be emulsifying or oil splitting depending on caustic level, customer adds own caustic for best economy. | TDS | SDS | |
DYNAPREP SE300 NF | Nonylphenol and nonylphenol ethoxylate free version of DYNAPREP SE300. | TDS | ||
DYNAPREP SE350 | Liquid, heavy duty cleaner suitable for both soak and electro cleaning of steel, cast iron and stainless steel. This is a medium alkalinity, heavy-duty product formulated to be effective with or without reverse electro cleaning. | TDS | SDS | |
DYNAPREP SE355 | Liquid, heavy duty cleaner suitable for both soak and electro cleaning of steel, cast iron and stainless steel. This is a high alkalinity, phosphate free, heavy-duty product formulated to be effective with or without reverse electro cleaning. | TDS | ||
DYNAPREP SE400 | Powdered, mildly alkaline cleaner suitable for both soak and electro cleaning of most substrates including steel, copper, brass and zinc die cast. | TDS | SDS | |
DYNAPREP SE401 | Powdered mildly alkaline soak and electro cleaner for use on both ferrous and non-ferrous metals. Contains a corrosion inhibitor to protect steel, copper and copper alloys when manufacturing operations are performed prior to final coating. | TDS | ||
DYNAPREP SE402 | Phosphate free, concentrated powdered alkaline combination soak and electro cleaner for use on both ferrous and non-ferrous metals. | TDS | ||
DYNAPREP SE403 | Concentrated powdered mildly alkaline combination soak and electro cleaner for use on both ferrous and non-ferrous metals. | |||
DYNAPREP SE550 | Concentrated powdered mildly alkaline soak and electro cleaner for use on both ferrous and non-ferrous metals, along with cathodic electrocleaning of steel, stainless steel and nickel activation. | TDS | SDS | |
DYNAPREP WA | Liquid surfactant mixture, which lowers surface tension, reduces fuming, increases detergency and controls oil in acidic and alkaline solutions. Can also be added to Dynamix acid zinc solutions to eliminate the effects of oil contamination. | TDS | SDS | |
DYNAPREP WA-NF | Alkylphenols and alkylphenol ethoxylates free liquid surfactant mixture, which lowers surface tension, reduces fuming, increases detergency and controls oil in acidic and alkaline solutions. | TDS | SDS | |
DYNATREAT ACID PURE | Chemical reagent product that will allow metals, organics and impurities to be filtered out of solution and extend the life of hydrochloric acid, sulphuric acid, nitric acid, citric acid, phosphoric acid, acid salts, acid mixtures. | TDS | SDS | |
DYNAPREP E150 | Concentrated liquid surfactant package for the electro cleaning of steel, and stainless steel. This is a high alkalinity, non-chelated, heavy-duty electro cleaner formulated to be effective with or without reverse electro cleaning. Customer adds own caustic for best economy | Electro Cleaners | TDS | SDS |
DYNAPREP E150 NF | Liquid surfactant package for the electro cleaning of steel, and stainless steel. This is a high alkalinity, non-chelated, heavy-duty electro cleaner formulated to be effective with or without reverse electro cleaning and is nonylphenol and nonylphenol ethoxylate free. | Electro Cleaners | TDS | |
DYNAPREP E160 ULTRA | DYNAPREP E160 ULTRA is a liquid surfactant package for the electro cleaning of steel parts with excellent oil and smut removal. This is a high alkalinity, chelated, heavy-duty electro cleaner. | Electro Cleaners | TDS | SDS |
DYNAPREP E170 DS | DYNAPREP E170 DS is a heavy duty, powdered, alkaline descaler designed to remove heat treat scales and rust from ferrous substrates and stains from copper and its alloys. DYNAPREP E170 DS can also be used to strip paint with or without current, remove smut after pickling and as a cathodic activator for nickel. | Electro Cleaners | TDS | |
DYNAPREP E450 | Heavy duty, powdered, alkaline electro cleaner designed for steel, and stainless steel. Dynaprep E450 is a high alkalinity, non-chelated and non-emulsifying electro cleaner formulated to be effective for direct, or reverse current electro cleaning. Dynaprep E450 does not containalkylphenols nor alkylphenol ethoxylates. | Electro Cleaners | TDS | SDS |
DYNAPREP E451 | Heavy duty, powdered, alkaline electro cleaner designed for steel, and stainless steel. Dynaprep E451 is a high alkalinity, non-chelated and non-emulsifying electro cleaner formulated to be effective for direct, or reverse current electro cleaning. Dynaprep E451 does not containNonylphenols and is octylphenol free. | Electro Cleaners | TDS | SDS |
DYNAPREP ELECTRO #2 | Heavy duty, powdered, high alkalinity, non chelated, non-emulsifying electro cleaner designed for steel, and stainless steel. DYNAPREP ELECTRO #2 has a long standing reputation as a great electrocleaner for critical cleaning applications such as bright nickel plating lines. | Electro Cleaners | TDS | |
DYNAPREP ELECTRO #3 | Heavy duty, powdered, alkaline electro cleaner designed for steel, and stainless steel. DYNAPREP ELECTRO #3 is a phosphate free, high alkalinity, non-chelated and non-emulsifying electro cleaner formulated to be effective for direct, or reverse current electro cleaning. | Electro Cleaners | TDS | |
DYNAPREP BCR | Concentrated, powdered, low alkalinity soak cleaner used for the removal of buffing compounds from both ferrous and non-ferrous metals. | Soak Cleaners | TDS | |
DYNAPREP DS 520 | DYNAPREP DS 520 is a heavy duty, liquid, alkaline descaler designed to remove heat treat scales and rust from ferrous substrates. DYNAPREP DS 520 can also be used to strip some types of enamels and performs well as an electro cleaner. FEATURES:• Cyanide and phosphate free.• Minimal hydrogen embrittlement.• Excellent with or without current to remove light scale, rust, phosphate coatings, oxides, oil, grease, paint and smut.• Prevents scale build-up on tank walls and heating coils.• High conductivity for maximum gassing and cleaning effect.• Not sensitive to hard water.• Does not attack mild steel substrates.• Superior rinsing properties minimizing drag-out loses. | Soak Cleaners | TDS | SDS |
DYNAPREP GPC | Caustic soda and phosphate free concentrated heavy-duty liquid citrus-based cleaner for use as a general purpose cleaner on concrete and tiled surfaces. Very effective at removing tough soils, grease, oil etc from shop floors, tiled floors, machines and other hard surfaces. | Soak Cleaners | TDS | SDS |
DYNAPREP GPS | Phosphate free concentrated heavy-duty liquid detergent for use as a general purpose cleaner on concrete and tiled surfaces. Very effective at removing tough soils, grease, oil etc from shop floors, tiled floors, machines and other hard surfaces. | Soak Cleaners | TDS | SDS |
DYNAPREP S100 | Concentrated liquid surfactant package for the soak cleaning of steel, stainless steel and leaded steel. This is a high alkalinity, non-chelated, heavy-duty soak cleaner formulated to be effective in hard water areas. Can be emulsifying or oil splitting depending on caustic level, customer adds own caustic for best economy. Dynaprep S100 is Nonyl Phenol (NP) and Nonyl Phenol Ethoxylate (NPE) free. | Soak Cleaners | TDS | SDS |
DYNAPREP S110 | Liquid surfactant package for the soak cleaning of steel, stainless steel, leaded steel and aluminum. This is a high alkalinity, heavy-duty soak cleaner formulated to be effective in hard water areas. Nonylphenol and nonylphenol ethoxylate free. | Soak Cleaners | TDS | SDS |
DYNAPREP S130 SS | Unique powdered alkaline blend specifically developed to remove all types of soils from Stainless Steel. The specific wetting agents provide fast wetting and contribute to the dispersion and loosening of soils and dirt. Suitable for use on all stainless steels, copper, brass and ferrous substrates. | Soak Cleaners | TDS | SDS |
DYNAPREP S200 | Powdered high-performance, non-etch, non-silicated, non-caustic, alkaline soak cleaner that is very effective in removing soils and lubricants from aluminum surfaces. Dynaprep S200 does not leave a difficult to remove film typical non-etch cleaners and is also suitable for use as a multi-metal soak cleaner for all substrates including zinc die-cast. | Soak Cleaners | TDS | SDS |
DYNAPREP S201 | High detergent, mildly alkaline, emulsifying, non-etch soak cleaner for aluminum. Since Dynaprep S201 does not contain silicates, no residual siliceous films remain to cause a non-uniform appearance after electroless nickel plating. Dynaprep S201 contains no EDTA, providing a waste treatment friendly product. At recommended concentration, and temperature Dynaprep S201 will not etch aluminum. | Soak Cleaners | TDS | |
DYNAPREP S202 | Low foaming version of Dynaprep S200 | Soak Cleaners | TDS | |
DYNAPREP S237-US | DYNAPREP S237-USis a mildly alkaline Immersion cleaner with good emulsifying characteristics, for the cleaning of copper and aluminum alloys.DYNAPREP S237-UScan also be successfully used as an ultrasonic cleaner for the removal of polishing paste residue from brass surfaces. | Soak Cleaners | TDS | SDS |
DYNAPREP S250 | Heavy duty, concentrated powdered alkaline soak cleaner for use on steel, zinc die-cast, copper and brass. Dynaprep S250 is non-chelated and non-emulsifying. | Soak Cleaners | TDS | SDS |
DYNAPREP S250 NPF | Heavy duty, concentrated powdered alkaline soak cleaner for use on steel, zinc die-cast, copper and brass. Dynaprep S250-NPF is non-chelated, non-emulsifying,does not containnonylphenols and is octylphenol free. | Soak Cleaners | TDS | |
DYNAPREP S260 | Dynaprep S260 is a heavy duty, concentrated, powdered, high alkalinity soak cleaner for use on steel, stainless steel and leaded steel. Dynaprep S260 is an oil-splitting cleaner that is effective at removing most soils including water-soluble oils, mineral oils, drawing compounds and buffing compounds. Dynaprep S260 does not contain alkylphenols nor alkylphenol ethoxylates. | Soak Cleaners | TDS | SDS |
DYNAPREP S270 | Heavy duty, concentrated, powdered, high alkalinity soak cleaner for use on steel, stainless steel and leaded steel. Dynaprep S270 is an emulsifying cleaner that is effective at removing most soils including water-soluble oils, mineral oils and drawing. | Soak Cleaners | TDS | SDS |
DYNAPREP S280 | DYNAPREP S280 is a concentrated liquid acidic soak cleaner / conditioner for use on ferrous metals, aluminum, zinc, copper, copper alloys and stainless steel. This cleaner will remove light oils, rust, rust, heat scale, weld scale and oxides as well as condition ferrous, aluminum and zinc surfaces into a metal-phosphate surface which serves as a paint base. | Soak Cleaners | TDS | |
DYNAPREP S281 | Concentrated liquid acidic soak cleaner for use on steel parts prior to galvanizing. | Soak Cleaners | TDS | |
DYNAPREP S290 | Dynaprep S290 is a multi-purpose, heavy duty, concentrated, powdered, high alkalinity immersion soak cleaner for ferrous metal. Dynaprep S290 is an emulsifying cleaner that is effective at removing most soils including heavily chlorinated and sulphurized oils, fats, and coolants from metal substrates. Its unique formulation allows complete lifting of soils and emulsification of oils, reducing residuals on washed parts. | Soak Cleaners | TDS | |
DYNAPREP S291 | Heavy duty, concentrated, powdered, high alkalinity soak cleaner for use on steel, stainless steel and leaded steel. Dynaprep S291 is an emulsifying cleaner that is effective at removing most soils including water-soluble oils, mineral oils and drawing. | Soak Cleaners | TDS | |
DYNAPREP S500 | Dynaprep S500 is a non-caustic, concentrated powdered alkaline soak cleaner for use on steel, zinc die-cast, copper, brass and aluminum. Dynaprep S500 is non-chelated and is an excellent choice for difficult to remove soils in short cleaning cycles. | Soak Cleaners | TDS | SDS |
DYNAPREP S500A | Dynaprep S500A is a non-caustic, concentrated powdered alkaline soak cleaner for use on steel, zinc die-cast, copper, brass and aluminum. Dynaprep S500A is non-chelated and is an excellent choice for difficult to remove soils in short cleaning cycles. | Soak Cleaners | TDS | |
DYNAPREP S600 | Dynaprep S600 is a mildly alkaline, concentrated powdered soak cleaner formulated for removing buffing compounds from steel, zinc die-cast, copper, brass and aluminum. | Soak Cleaners | TDS | |
DYNAPREP DC | Two component, alkaline, heavy duty, low foaming immersion or spray cleaner for use on ferrous metals. Dynaprep DC will provide effective cleaning of soils including heavily chlorinated, sulphurized oils, fats, coolants, buffing compounds and drawing compounds. | Spray Cleaners | TDS | |
DYNAPREP SP140 | Concentrated liquid product, designed for use as an immersion or spray cleaner for ferrous metal substrates. DYNAPREP SP140 provides effective removal of drawing compounds, heavily chlorinated, sulphurized oils, fats, coolants and dry film lubricants. | Spray Cleaners | TDS | SDS |
DYNAPREP SP140 NF | Concentrated liquid product, designed for use as an immersion or spray cleaner for ferrous and non-ferrous metal substrates. DYNAPREP SP145 provides effective removal of drawing compounds, heavily chlorinated, sulphurized oils, fats, coolants and dry film lubricants. | Spray Cleaners | TDS | SDS |
DYNAPREP SP145 | Concentrated liquid potash-based product, designed for use as an immersion or spray cleaner for ferrous metal substrates. DYNAPREP SP145 is a low-foaming product that provides effective removal of soils, including heavily chlorinated and sulphurized oils, fats and coolants. It offers good tramp oil rejection, fines settling, is easily filtered, and allows complete lifting of soils without emulsification of oils, allowing the free oils to be removed by weir or skimmer. | Spray Cleaners | TDS | |
DYNAPREP SP295 | Dynaprep SP295 is a multi-purpose, heavy duty, concentrated, powdered cleaner formulated for use as immersion or spray cleaner for all metals including aluminum. Dynaprep SP295 provides safe, effective removal of manufacturing soils, including heavily chlorinated and sulphurized oils, fats and coolants from metal substrates. | Spray Cleaners | TDS | SDS |
DYNAPREP SP366 | Potash-based, phosphate-free,multi-purpose, heavy duty, concentrated, liquid cleaner formulated for use as an immersion or spray cleaner for ferrous metals. Dynaprep SP366 provides safe, effective removal of manufacturing soils, including heavily chlorinated and sulphurized oils, fats and coolants from metal substrates. | Spray Cleaners | TDS | |
DYNAPREP SSE | High detergency, low foaming and concentrated liquid alkaline product for use as an immersion, spray or electro cleaner for ferrous metal substrates. DYNAPREP SSE provides effective removal of drawing compounds, heavily chlorinated, sulphurized oils, fats, and coolants. | Spray Cleaners | TDS | |
DYNAPREP US No.1 | Concentrated, caustic-free liquid formulated for use as an ultrasonic cleaner. Non-ionic surfactants, wetting agents, dispersants and deflocculents are combined to provide excellent detergency and free rinsing properties. DYNAPREPUS #1 provides exceptional performance for virtually all base metals. | Spray Cleaners | TDS | SDS |
Product Name | Summary | Category | Tech Data Sheet | Safety Data Sheet |
---|---|---|---|---|
DYNAPLATE AC-D | Single additive bright acid copper plating process with high levelling and formulated specifically for higher current density plating. | TDS | SDS | |
DYNAPLATE AC-S | Ultra-high performance, dye-free addition agent system for bright acid copper plating, which produces exceptionally bright, ductile deposits with low internal stress. | TDS | SDS | |
DYNAPLATE CAD | Concentrated liquid addition agent for producing bright, fine grained cyanide cadmium electroplated deposits. | TDS | SDS | |
DYNAPLATE CARBONATE REDUCER | Powdered additive used for the fast precipitation and reduction of carbonates from cyanide electroplating solutions. | TDS | SDS | |
DYNAPLATE CP | Purifier used to precipitate heavy metal impurities in cyanide cadmium and zinc plating baths. | SDS | ||
DYNAPLATE Cr FS | PFOS free mist suppressant for hexavalent chromium plating solutions. | TDS | SDS | |
DYNAPLATE Cr FSL | Low foaming PFOS free mist suppressant used in hexavalent chromium plating solutions to control misting and reduce ventilation requirement. | TDS | SDS | |
DYNAPLATE Cr FSN | PFOS, PFAS and fluoride free fume suppressant used in hexavalent chromium plating solutions to control misting and reduce ventilation requirement. | TDS | SDS | |
DYNAPLATE NC-CAD | Dynaplate NC-CAD is a non-cyanide process for electroplating bright, fine-grained cadmium deposits. The process is suitable for both rack and barrel operations. | TDS | SDS | |
DYNAPLATE Sn-RA | Additive used in tin post plate rinses to eliminate stains and improve solderability of the deposit. | TDS | SDS | |
DYNAPLATE SnP | Additive used to precipitate stannic tin. | TDS | SDS | |
DYNATREAT DEFOAMER #3 | Specially formulated defoamer for use in DYNAPLATE CLZ chloride zinc process. | TDS | SDS | |
DYNATREAT DEFOAMER #4 | Special additive to control foam in acid tin plating baths. Provides immediate de-foaming and long-term foam prevention. | TDS | ||
DYNAPLATE Cr CC | Chrome | TDS | ||
DYNAPLATE Cr CL | Chrome | TDS | SDS | |
DYNAPLATE Cr CP | Chrome | TDS | ||
DYNAPLATE Cr CTR | Chrome | TDS | ||
DYNAPLATE Cr ES | New Product Description | Chrome | TDS | SDS |
DYNAPLATE Cr HS | Chrome | TDS | ||
DYNAPLATE Cr HS C | Chrome | SDS | ||
DYNAPLATE Cr HS ML | Chrome | SDS | ||
DYNAPLATE Cr HS MP | Chrome | SDS | ||
DYNAPLATE Cr HS RL | Chrome | SDS | ||
DYNAPLATE Cr HS RP | Chrome | SDS | ||
DYNAPLATE Cr SF | New Product Description | Chrome | TDS | SDS |
DYNAPLATE Cr-HS | DYNAPLATE Cr-HS is a specially formulated High Speed Functional Chromium electroplating process which is fluoride free. The high-speed capabilities are a function of the chemistry design, which allows higher current efficiencies. The system has the capability of processing at much higher current densities as compared to conventional systems, which do not use secondary catalysts. The increase in the deposition rate is a result of the increase in the current efficiency. The DYNAPLATE CR-HS system, unlike the conventional mixed fluoride catalyst systems, does not cause cathodic low current density etching. The electroplated deposits from the DYNAPLATE Cr-HS system exhibit very shiny, bright and smooth surfaces. The micro-hardness of the deposit shows values in the 1,000 KHN100 range, with a micro-cracked count greater than 1,000 cracks per linear inch providing superior corrosion resistance. With these characteristics, there is a very noticeable increase in the wear performance of this deposit. | Chrome | TDS | SDS |
DYNAPLATE CrC | Chrome | |||
DYNAPLATE CrC | Chrome | TDS | SDS | |
DYNAPLATE TBCr | Black trivalent chrome plating process developed to meet the needs of an environmentally safer process than the existing chromic acid based processes. | Chrome | TDS | |
DYNAPLATE TrC | Trivalent chrome plating process developed to meet the needs of an environmentally safer process than the existing chromic acid based processes. | Chrome | TDS | SDS |
DYNAPLATE CNC BRIGHTENER | Copper / Copper Alloys | SDS | ||
DYNAPLATE CNC FS | DYNAPLATE CNC FS is used to reduce the surface tension of cyanide brass and copper plating solutions that utilize mechanical agitation. It improves surface contact with the plating solution, and reduces drag out. | Copper / Copper Alloys | TDS | |
DYNAPLATE CNC WETTER | Copper / Copper Alloys | SDS | ||
DYNAPLATE EN 1000 A | Electroless Nickel | |||
DYNAPLATE EN 1000 B | Electroless Nickel | |||
DYNAPLATE EN 1000 C | Electroless Nickel | |||
DYNAPLATE EN 6000 A | Electroless Nickel | |||
DYNAPLATE EN 6000 B | Electroless Nickel | |||
DYNAPLATE EN 6000 C | Electroless Nickel | |||
DYNAPLATE EN 6000 RC A | Electroless Nickel | |||
DYNAPLATE EN 6000 RC B | Electroless Nickel | |||
DYNAPLATE EN 6000 RC C | Electroless Nickel | |||
DYNAPLATE EN 6500 | New Product Description | Electroless Nickel | TDS | SDS |
DYNAPLATE EN 9000 A | Electroless Nickel | |||
DYNAPLATE EN 9000 B | Electroless Nickel | |||
DYNAPLATE EN 9000 C | Electroless Nickel | |||
DYNAPLATE EN ALBOND A | Electroless Nickel | |||
DYNAPLATE EN ALBOND B | Electroless Nickel | |||
DYNAPLATE EN ALBOND C | Electroless Nickel | |||
DYNAPLATE Ni AW | Nickel | SDS | ||
DYNAPLATE Ni B | Nickel | SDS | ||
DYNAPLATE Ni BOOSTER | Nickel | SDS | ||
DYNAPLATE Ni C | Nickel | SDS | ||
DYNAPLATE Ni LB | Nickel | SDS | ||
DYNAPLATE Ni MW | Nickel | SDS | ||
DYNAPLATE Ni P | Nickel | SDS | ||
DYNAPLATE SB-NiB | Nickel | SDS | ||
DYNAPLATE SB-NiM | Nickel | SDS | ||
DYNAPLATE ISn | Stable liquid process that deposits a thin, bright uniform immersion tin over copper and copper alloys. The deposited tin promotes solderability and inhibits oxidation of the substrate. | Tin | TDS | |
DYNAPLATE ITP | Immersion tin process for coating properly prepared aluminum and aluminum alloy surfaces. | Tin | TDS | SDS |
DYNAPLATE Sn Matte | Tin | SDS | ||
DYNAPLATE SnB | Tin | SDS | ||
DYNAPLATE SnM | Tin | SDS | ||
DYNAPLATE CLZ | Newest generation, extremely bright, water soluble and ductile chloride zinc system for rack and barrel plating. | Zinc | TDS | SDS |
DYNAPLATE CZ | Zinc | SDS | ||
DYNAPLATE NCZ B | Zinc | SDS | ||
DYNAPLATE NCZ C | Zinc | SDS | ||
DYNAPLATE NCZ CARBONATE REDUCER | Powdered additive used for the fast precipitation and reduction of carbonates from cyanide and non-cyanide electroplating solutions. It reduces carbonates without increasing the cyanide but, the alkalinity of the electroplating process will increase. Excessive carbonates in an electroplating solution can result in lower efficiency, roughness, anode polarization, high chemical and additive consumption. | Zinc | TDS | |
DYNAPLATE NCZ P | Zinc | SDS | ||
DYNAPLATE CL ZnNi-B | Zinc Alloy | SDS | ||
DYNAPLATE CL ZnNi-C | Zinc Alloy | SDS | ||
DYNAPLATE NCZ Co ADDITIVE | Zinc Alloy | |||
DYNAPLATE NCZ CoB | Zinc Alloy | |||
DYNAPLATE NCZ CoC | Zinc Alloy | |||
DYNAPLATE NCZ COMPLEXOR | Zinc Alloy | SDS | ||
DYNAPLATE NCZ CONDITIONER | Zinc Alloy | SDS | ||
DYNAPLATE NCZ Fe ADDITIVE | Zinc Alloy | |||
DYNAPLATE NCZ FeB | Zinc Alloy | |||
DYNAPLATE NCZ FeC | Zinc Alloy |
Product Name | Summary | Category | Tech Data Sheet | Safety Data Sheet |
---|---|---|---|---|
DYNABRITE 8538 | Non-chrome, liquid material that is added to phosphoric acid to create a stable electropolishing solution for stainless steel. | TDS | SDS | |
DYNABRITE 8538 CONCENTRATE | Non-chrome, liquid material that is added to phosphoric acid and sulphuric acid to create a stable electropolishing solution for stainless steel. | TDS | SDS | |
DYNABRITE 8538 RTU | Non-chrome, liquid stable electropolishing solution for stainless steel. | TDS | SDS | |
DYNABRITE 8539 | Non-chrome, liquid material that is added to phosphoric acid to create a stable electropolishing solution for aluminum. | TDS | SDS | |
DYNABRITE 8588 | Non-chrome, liquid material that is added to phosphoric acid and sulfuric acid to create a stable electropolishing solution for mild steel. | TDS | SDS | |
DYNAFIN 5504 | Liquid product used full strength to polish and passivate stainless steel. | TDS | SDS | |
DYNAFIN ALB | Fluoride based, non-chrome, acidic liquid concentrate formulated for cleaning and brightening/desmutting most aluminum surfaces. | TDS | SDS | |
DYNAFIN CAP | Powdered chrome containing material for producing lustrous finishes on copper and its alloys. Dynafin CAP will passivate the surface and provide resistance to corrosion, staining, and tarnishing. | TDS | SDS | |
DYNAFIN CAP-NC | Liquid, non-chrome containing material for producing lustrous finishes on copper and its alloys. Dynafin CAP-NC will passivate the surface and provide resistance to corrosion, staining, and tarnishing. | TDS | SDS | |
DYNAFIN FE | Room temperature, immersion process designed to brighten carbon steel surfaces. Dynafin FE can also be used to deburr or to remove surface imperfections. | TDS | SDS | |
DYNAFIN FE-L | Liquid room temperature, immersion process designed to brighten carbon steel surfaces. Dynafin FE-L can also be used to deburr or to remove surface imperfections. | TDS | SDS | |
DYNAFIN SSP | Liquid blend of chemicals that is diluted with water to clean and passivate most grades of stainless steel, including austenitic, martensitic, and precipitation hardened. | TDS | SDS | |
DYNAFIN ZN | Acidic, chromate free product used to chemically polish, brighten and condition the zinc die cast surface for subsequent finishing. Also effective to deburr or remove surface imperfections. | TDS |
Product Name | Summary | Category | Tech Data Sheet | Safety Data Sheet |
---|---|---|---|---|
DYNAGALV AS | DYNAGALV ASis an additive that is added to zinc and ammonium chloride galvanizing fluxes to promote bonding and eliminate explosions when entering the molten zinc bath. FEATURES· Reduces zinc consumption by eliminating splatter.· Increases operator safety. · Increases productivity by improving shedding of the flux solution. · Reduces labour involved in resurfacing of galvanized parts. · Reduces ash and smoke. · Reduces flux consumption. · Improves surface quality and uniformity of galvanized work. | Galvanizing | TDS | SDS |
HOT-DIP GALVANIZING PRE-FLUX | Galvanizing pre-fluxes, or dry kettle galvanizing fluxes, are used to dissolve any oxide films and impurities which are formed on the steel surface after pickling, but before galvanizing. Fluxes also ensure that a wettable and clean metal surface will come in contact with the molten zinc metal. FLUX TYPEACNCOMMON USEMono Salt 0.39Galvanizing sheet drying oven requiredDouble Salt0.79Galvanizing pipe, drying oven requiredTriple Salt1.17Basic galvanizing flux used in North AmericaQuadraflux1.6General purpose flux | Galvanizing | TDS | |
DYNA-SHED No.1 | Used in final hot water rinses to promote water shedding. Can also be added to hydrochloric or sulphuric acid dips and alkaline processes such as electrolytic chromium strippers to reduce drag-out and is suitable for use on all metals. | Miscellaneous | TDS | |
DYNAFIN SR-1 | Simple method for the removal of certain oxide type stains from plated nickel and/or ferrous or stainless steel surfaces. There is virtually no attack of the surface and proper use should help to protect the surface from further staining. May be used in the post-plate cycle or after the appearance of staining. | Miscellaneous | TDS | SDS |
DYNALUBE | Formulated from a lithium complex stearate thickener and highly refined, high viscosity stock. It is fortified with oxidation, rust and corrosion inhibitors to extend the service life and protect metal surfaces from rust and etching. This makes it ideal for use in many plating applications including connections, barrel and rack contacts, saddles, flight bars etc. | Miscellaneous | TDS | SDS |
DYNAPLATE STOP OFF #2 | Dynaplate Stop-Off #2is a liquid maskant used as a stop-off for electroless nickel plating, hard coat anodizing, chrome plating, chemical milling, conversion coating and acid solutions. The cured film is tack-free and will not adhere to itself or other parts. Dynaplate Stop-Off #2provides physical protection against surface damage, abrasion and provides a high degree of protection against acid and alkaline attack. It is a very easy way to apply a strippable coating for the protection of substrates from scratching and marring during handling and long term storage. | Miscellaneous | TDS | |
DYNASHED #2 | liquid additive that can be used in spray and immersion applications to improve water shedding. This rinse aid counter-acts the effects of hard water usually present in city water and provides a uniform rinse run down and drying without hard water spots. | Miscellaneous | TDS | SDS |
Product Name | Summary | Category | Tech Data Sheet | Safety Data Sheet |
---|---|---|---|---|
DYNACOAT #6 | DYNACOAT #6 provides a clear, hard colorless film that prevents white rust and staining on zinc galvanized steel surfaces during storage. Will not interfere with subsequent welding or soldering operations. | TDS | ||
DYNACOAT 215 WAX | Rust preventative that is applied to black oxide, phosphate and bare steel. The resulting film will not rub off, has excellent adhesion, is extremely thin, waxy, dry-to-the-touch and offers excellent corrosion protection. | TDS | SDS | |
DYNACOAT DFL | Unique, water-based emulsion wax coating suitable for use as a corrosion preventive and decorative coating on steel, phosphated surfaces, anodized surfaces along with all types of plating, including cadmium and zinc. | TDS | SDS | |
DYNACOAT No.1 | Clear inorganic sealer that will enhance the corrosion resistance of chromated zinc and zinc alloys, along with nickel, steel, and chrome. | TDS | SDS | |
DYNACOAT No.2 | Enhances the corrosion resistance of chromated zinc and zinc alloys, along with nickel, steel, and chrome. The thin, uniform, water-repellent barrier coating will repel humidity and salt spray mist and provide superior corrosion protection. | TDS | SDS | |
DYNACOAT No.3 | Water based clear, high gloss, acrylic finish. Contains no organic solvents. The cured finish will not dissolve in water and the resulting finish has good resistance to scuffing and scratching. | TDS | SDS | |
DYNACOAT No.4 | Water based clear, medium gloss, acrylic finish. Contains no organic solvents. The cured finish will not dissolve in water and the resulting finish has good resistance to scuffing and scratching. | TDS | ||
DYNACOAT OS | High performance organic sealer that provides a hard clear finish that will enhance the corrosion resistance of chromated zinc and zinc alloys, along with nickel, steel, and chrome. | TDS | SDS | |
DYNACOAT OS #2 | Organic sealer providing a hard clear finish that will enhance the corrosion resistance of chromated zinc and zinc alloys, along with nickel, steel, and chrome. Coefficient of friction on electroplated zinc coatings between 0.16-0.19. | TDS | SDS | |
DYNACOAT ST#5 | Liquid dispersion of organic polymers chemically bonded with inorganic nanoparticles which will enhance the corrosion resistance of trivalent passivation, along with trivalent black as well as hexavalent yellow and olive drab chromates. | TDS | ||
DYNACOAT TnT | Concentrated, water soluble, liquid product that is used to modify the lubricity of zinc and trivalent chromate coated fasteners. | TDS | SDS | |
DYNACOAT WS | Clear, medium gloss hard drying emulsion wax coating that is applied to metal surfaces. The resulting film will not rub off, has excellent adhesion, is ductile and offers good corrosion protection. | TDS | SDS | |
DYNAFIN CI No.1 | Corrosion inhibitor used for protecting steel, nickel, aluminum, copper and copper alloys. Helps reduce staining and increases lubricity. Can also be used in burnishing operations. | TDS | SDS | |
DYNAFIN CI No.2 | Liquid, chrome free, phosphate free corrosion inhibitor for zinc, ferrous metals and iron, zinc or manganese modified phosphate coatings. | TDS | SDS | |
DYNAFIN CI No.3 | Liquid, chrome free, corrosion inhibitor for un-plated areas on ferrous substrates following nickel and chromium plating. | TDS | SDS | |
DYNAFIN CI No.4 | Light duty corrosion inhibitor for most metals. It leaves a dry, invisible film which will not interfere with subsequent finishing operations. DYNAFIN CI No.4 can also be used in burnishing operations. | TDS | ||
DYNAFIN CI No.5 | Liquid, chrome free, corrosion inhibitor for un-plated areas on ferrous substrates following nickel and chromium plating. The final seal leaves a clear water-repellent film that will not stain deposits after drying. | TDS | ||
DYNAFIN PTFE-60 | PTFE coating on aluminum surfaces where high lubricity is required. | TDS | ||
DYNAFIN WD | Water displacing, non-staining rust preventive which will separate water from metal surfaces after machining or cleaning. The films are dry-to-touch and are effective in the protection of ferrous and non-ferrous metals from atmospheric corrosion. | TDS | SDS | |
DYNAFIN WD #2 | Outstanding water displacing, non-staining rust preventive which will separate water from metal surfaces after machining or cleaning. The films are dry-to-touch and protect ferrous and non-ferrous metals from atmospheric corrosion. | TDS |
Product Name | Summary | Category | Tech Data Sheet | Safety Data Sheet |
---|---|---|---|---|
DYNASTRIP ACS | Non-chrome, liquid material that will remove anodic films from aluminum by immersion without attacking the aluminum surface. | TDS | SDS | |
DYNASTRIP Cr | Specially formulated, powdered alkaline compound that is used to electrolytically strip chromium from steel and nickel substrates, without attacking the base metal. | TDS | ||
DYNASTRIP Cr-2 | Specially formulated, powdered alkaline compound that is used to electrolytically strip chromium from steel and nickel substrates, without attacking the base metal. Will strip copper, most copper alloys, zinc and cadmium anodically. | TDS | SDS | |
DYNASTRIP DSP | Unique combination of methylene chloride and accelerators to effectively strip accumulated paint and overspray from metal substrates. Recommended for use on steel and aluminum, but not recommended for zinc or magnesium. | TDS | ||
DYNASTRIP HS ACCELERATOR | Liquid additive for use with hot alkaline stripping solutions to accelerate the paint and ink removal from ferrous parts. | TDS | SDS | |
DYNASTRIP HT | High temperature paint stripper designed for non-ferrous substrates but will work very well on ferrous as well. | TDS | SDS | |
DYNASTRIP MM | Specially formulated powder that is used with sodium cyanide or caustic soda to strip nickel, copper, zinc, tin, tin-lead, brass, cadmium, and silver from steel, copper, brass and magnesium substrates without attacking the base metal. | TDS | SDS | |
DYNASTRIP Ni-Cu | Dynastrip Ni-Cu is a specially formulated powder that when mixed with water, will provide a safe, immersion solution to strip nickel deposits from copper substrates without attacking the base metal. | TDS | ||
DYNASTRIP Ni-DC | Specially formulated powder that when mixed with water, will provide a safe, electrolytic solution to strip nickel deposits from steel and stainless steel substrates without attacking the base metal. | TDS | ||
DYNASTRIP Ni-EN | Specially formulated non-cyanide, alkaline stripper that dissolves high phosphorous, electroless nickel deposits from steel, copper and its alloys by immersion. | TDS | SDS | |
DYNASTRIP Ni-Fe | Specially formulated powder that when mixed with water, will provide a safe, immersion solution to strip nickel deposits from ferrous substrates without attacking the base metal. | TDS | SDS | |
DYNASTRIP RS | Specially formulated liquid that when mixed with water, will provide an electrolytic rack stripping solution . | TDS | SDS | |
DYNASTRIP RT | Room temperature, non-hazardous paint and powder-coating stripper. Can be used on all substrates including zinc and aluminum. | TDS | SDS | |
DYNASTRIP RTN | Room temperature, non-hazardous paint and powder-coating stripper. Can be used on all substrates including zinc and aluminum, and is safe to use with silicon masking plugs. | TDS | SDS | |
DYNASTRIP Sn | Dynastrip Sn is a specially formulated, peroxide, fluoride and fluoborate free liquid stripper that will strip tin and tin/lead deposits from copper substrates. | TDS | ||
DYNASTRIP Sn No.2 | Dynastrip Sn is a specially formulated, peroxide, fluoride and fluoborate free liquid stripper that will strip tin and tin/lead deposits from copper substrates | TDS | ||
DYNASTRIP Zn | Specially formulated alkaline, non-cyanide powder that is dissolved with water to strip zinc from steel parts, without attack of the base metal. An alkaline protective film is left on the surface. | TDS | SDS |
Product Name | Summary | Category | Tech Data Sheet | Safety Data Sheet |
---|---|---|---|---|
DYNATREAT Cr-R | Reduces hexavalent chrome to its trivalent state in alkaline or acid solutions. Can be added to alkaline cleaners to eliminate the effects of hexavalent chrome contamination. | TDS | SDS | |
DYNATREAT Cr-RL | Sodium bisulfite solution | |||
DYNATREAT DEFOAMER #1 | Silicated defoamer used to eliminate foam in waste treatment systems and is very effective in either acidic or alkaline aqueous solutions. | TDS | SDS | |
DYNATREAT DEFOAMER #2 | Non-silicated defoamer used to eliminate foam in either acidic or alkaline aqueous solutions. | TDS | SDS | |
DYNATREAT EFloc-A3 | Concentrated liquid emulsion, high molecular weight, metal precipitator for flocculation of solids in industrial waste water treatment systems. | TDS | SDS | |
DYNATREAT EFloc-C2 | Concentrated liquid emulsion, high molecular weight cationic metal precipitator for flocculation of solids in industrial waste water treatment systems. | TDS | SDS | |
DYNATREAT EFloc-RTU | Ready to use, liquid emulsion, high molecular weight, anionic metal precipitator for flocculation of solids in industrial waste water treatment systems. | TDS | SDS | |
DYNATREAT LAC | Used for the removal of lead anode films and scales which can form on lead anodes in hexavalent chromium solutions. Complies with BAC5709. | TDS | SDS | |
DYNATREAT MC -SP | High performance liquid poly-aluminum-chloride coagulant that offers superior clarification in potable, wastewater or industrial applications. | TDS | SDS | |
DYNATREAT MC-CC | Liquid blend of calcium salts to improve coagulation and flocculation in industrial waste water systems. It is particularly effective for aiding in precipitation of phosphates, detergents and oils. | TDS | SDS | |
DYNATREAT MP-05 | Liquid coagulant with a cationic charge, excellent for breaking emulsions formed with oils, inks, surfactants, etc. | TDS | ||
DYNATREAT MP-12 | Polymerized inorganic liquid precipitant formulated for the treatment of waste waters requiring removal of heavy metals - including chelated and complexed ions. | TDS | ||
DYNATREAT MP-88 | Polymerized inorganic liquid precipitant formulated for the treatment of waste waters requiring removal of heavy metals including chelated and complexed ions. Precipitates a wide variety metals simultaneously with minimum sludge generation. | TDS | SDS | |
DYNATREAT MP-915 | Liquid formulated for the reduction of hexavalent chromium and the removal of heavy metals from the effluents of plating baths, etching solutions and rinses in one step. | TDS | SDS | |
DYNATREAT MP-970 | Organic liquid precipitant formulated for the treatment of waste waters requiring removal of heavy metals including chelated and complexed ions. The reaction forms insoluble organo-metallic compounds with minimal sludge generation. | TDS | ||
DYNATREAT MP-AM | Heavy metal precipitant used to remove metals from waste water streams. It is particularly useful in the treatment of waste water from plating operations. | TDS | SDS | |
DYNATREAT MP-FS | Liquid polymerized ferric sulphate coagulant based on trivalent iron (Fe3+). Functions very well for both potable and waste water clarification and can be used for turbidity removal, colour removal, phosphate removal and heavy metal removal. | TDS | ||
DYNATREAT MP-HS | Liquid inorganic heavy-metal precipitant and stabilizer of heavy metals from plating, printed circuit board and other liquid waste streams. Use in conjunction with DYNATREAT coagulants and flocculants. | TDS | ||
DYNATREAT MP-SA | Liquid solution of sodium aluminate that can be used in water treatment as a co-coagulant. Particularly effective in aiding in precipitation by complexing with phosphates, detergents and oils. Very effective in colour and organic removal. | TDS | ||
DYNATREAT MP-TR | Proprietary liquid compound formulated to serve as non-toxic heavy-metal precipitant of heavy metals from industrial process wastewaters, including metals from chelated/complexed environments. | TDS | SDS | |
DYNATREAT PFloc-A5 | Powdered, high molecular weight, anionic metal precipitator for use in wastewater treatment. Neutralizes the negative charge of metal hydroxides, which accelerates the precipitation metals in plant effluent streams. | TDS | SDS |
Dynamix Inc. offers an extensive range of liquid and powder specialty toll blending products.
Quality Capabilities
Dynamix is ISO 9001:2008 certified
Production Capabilities
Production cabability is in excess of 1 million litres anually
Packaging Options